I saw a bracelet like this at Charming Charlie's but I knew I could easily make it, so I did. Alls it took was an old necklace chain (I used a thick one), you could also use multiple for a more layered look, a strand of pearl beads, and one strip of one inch wide fabric. It's just a basic braid of the three topped of with some hot glue that way it doesn't unravel. Easy peasy lemon squeezy! I plan on making different variations in multiple colors. Lemme know if you have any suggestions. :)
I Sew Made That
Monday, July 22, 2013
Sunday, July 7, 2013
Fabric Scraps + Toilet Paper Roll = Cute Cuff
I use paper towel rolls as ribbon holders and have been saving paper towel rolls for some time. I got uber bored the other night but didn't want to start on a sewing project because I would be leaving town for a couple weeks and I'd hate to leave it undone for so long. It came to me when I cut a pair of powder blue bermudas into mid thigh shorts. I loved the fabric and it looked really good with lace so I picked another fabric scrap and cut them into strips and began braiding them. I wanted a bracelet so I took the toilet paper roll and cut it about half an inch down.
After I braided it I used my hot glue gun and glued it onto the toilet paper roll, sewed a button on the one end, then put a piece of lace on it in a loop to fasten. Cute and only took like 20 minutes tops! Plus from the extra fabric I made a cute keychain, too!
After I braided it I used my hot glue gun and glued it onto the toilet paper roll, sewed a button on the one end, then put a piece of lace on it in a loop to fasten. Cute and only took like 20 minutes tops! Plus from the extra fabric I made a cute keychain, too!
Monday, June 17, 2013
Dress Shirt to Bomb Shell
I'm fascinated with all things vintage. I love the style, the hair, and the attitude they rocked in that era. Although I couldn't go back to that I figured I'd try to bring a little bit of it back. I was given this shirt and wasn't too fond of it on me, but it had great shape and a lot of potential.
Next I cut the back to kind of mirror the front using a rotary blade. I gave it a 3/8'' seam allowance on the back and straps and folded the fabric under the bust line in half and sewed it onto the seam of the bust.
First thing I did was cut off the sleeves turning it into a tank top, then I cut off the bottom about an inch or so from the bust line.
Sorry, I don't have a picture of how I did the bottoms, but I used the excess fabric from the top and used my favorite pair of underwear to draft the design but added a few inches to the waistline because I wanted them high waisted. I used the sleeves to thicken the crotch line then I sewed that onto the front side, then the back, then the sides together. I know this tutorial won't work for EVERY shirt, but hopefully it could offer at least a little inspiration. :)
Sunday, June 16, 2013
Recycled Pop Bottles to Earring Stand
My step dad drinks more Mtn Dew than anyone I know. We don't do anything with the pop bottles other than throw them away, so for awhile now I've been keeping them and cutting off the bottoms because they looked like a flower and I could use them to decorate or something. Well, they sat on my desk for a while and when I made my last earring holder I sat some in there and I realized how perfect it was! So with some hot glue, tape, 5 bottle bottoms, a pencil and a half, and some glitter I made this recycled beau!
Weapon of mass destruction!
Just kidding.. although, it kinda was for me. I had it on reverse (not knowing any better.) so it took some major muscles pressing down on it to get it to drill. Well, Matthew came in and realized it was on reverse so he turned it on the right way for me and I continued to press down on it with all my muscles (not knowing any better) and it lost contact with the board and the drill got me a good one in the stomach. Ouch.
Nevertheless, you will need a drill!
**Make sure it's NOT on reverse!**
Using the drill put a hole the size of a standard pencil in the middle of the bottom of the pop bottle after you cut them down to about three quarters of an inch. (On one of the bottoms I didn't drill through it all the way. I did this because I wanted the pencil to set inside of it. It's your choice, but I found it worked better for me.)
I continued to cut through the rest of them completely. Cutting four regularly and just the one as the base half way. Next I threaded the pencil through the hole. Be sure your pencil is straight on both ends. (Not sharpened)
I left about 2 and a half inches between each bottle bottom. After I placed them I used hot glue under the opening and on top to help stabilize it.
When I put the bottles over the pencil it tore the paint off the pencil because it was such a snug fit so I knew I couldn't paint it before therefor it would make it really hard to paint the pencil without getting it all over the bottles so I used masking tape and glitter to cover the pencil. It was super easy and what girl doesn't love a little sparkle? Yeah, I dunno any either. I used the sticky part of the tape to hold the glitter then the hot glue gun to attach the tape to the pencils. Slowly, tier after tier it came together!
Nothing beats a free craft that helps the environment!
Monday, June 3, 2013
Revamped Earring Holder
My sister got this I don't even know how many years ago when she had a crazy obsession for monkeys. Well, that obsession passed and it was just lying around so I upcycled it into something more age appropriate using birthday tulle.
I cut some of the strips of tulle into thirds and some I left whole or folded over for a thicker flower. I wanted definition, but I recommend trying a few different techniques and seeing which you like best. Starting at the end fold the paper over and over until you can roll it. The more you roll the larger the flower will be. I then hot glued them to the surface and wallah!
Stained Glass Jars
I absolutely love different shapes of glass and they double as cute storage so it's great, but I hate how they are all clear. Clear. Clear. Clear. Well, since it is harder to find stained glass I decided I'd try a little DIY of my own. Using home made Modge Podge (Elmer's School Glue and water mixed into a paste) and food coloring. *NOTE* they are NOT water proof.
- Pre-heat oven to 200 degrees.
- Add a few drops of food coloring to enough modge podge to cover the whole glass
- Stir and pour into the glass
- Tilt the jar until the whole glass is covered
- Turn glass upside down and let the mixture drip for 25 minutes
- Cover pan with wax paper and stick jars on top
- Bake in oven for 20 minute incriminates (if there is still some areas that are thicker coated then others put in the oven for additional time)
It was hard to make them completely perfect, but the longer you stick them in the oven the better they cover. But then you face the color fading and not being as vibrant. When I did the blue I put multiple coats and stuck it in the oven multiple times. Overall I'm happy with the outcome. I did it on so many different shapes of glass I got from olive's, pizza sauce, honey, and so on. It's a great project for a rainy day.
Upcycled Antique Dresser
I've been redoing my room for awhile now. I finally got around to painting the furniture! Woooo! I chose coral as my pop color against the grey walls. I was doing a color report and read that coral inspired creativity so it was a win-win really since my room was also doubling as my craft room.
Before being painted, but after sanding and a little handy work from gramps.
Thanks grampy! <3
I took off all the nobs and sanded them down. I was on a hunt for vintage nobs, but was never able to find any so I decided to use a little modge podge and some old maps. I loved using the maps because it brought out the coral color and I was then able to use the other colors in the map to decorate the rest of my room.
The glass doors were really pretty, but since I was using the dresser for storage purposes for things like clothes it wasn't really convenient, so I brought in the maps again. I couldn't be happier with the outcome!
Subscribe to:
Posts (Atom)